Porch, built in two phases

The front porch goes on now. The wrap bolts on later as the same deck kit on helical piles, without re-framing anything built in the First Phase. Drag to orbit, scroll to zoom, and tap any part to see what it is.

First Phase · front porch

Deck: 24'-0" × 12'-0" to wall faces
Deck height: 1'-8" above grade, 6" below floor
Posts: 4 in 3 bays of 7'-4¾"
Pedestals: 24" sq × 30" brick, stone cap
Beam line: 9'-9⅞" above grade
Clear under beams: 8'-1⅞"
Gable: 6/12, open king-post truss
Steps: 4 risers of 5", 5'-3⅝" wide
Foundation: Superior 4' box, 3 sides

Materials

Timber: rough-sawn DF. 6x12 drop beams, 6x10 truss members, 6x6 posts, after TJ's engineered porch (RMG 199255)
Connectors: Simpson black APVB66 post bases, APVL6 / APVT6 straps, APHH610 hangers, ¼"×6" SDS screws
Deck: composite, 5½" boards with 3/16" gaps, picture-frame border, on 2x10 PT joists @ 16"
Brick: light brick skirt, pedestals and wainscot on Superior's ledge
Porch roofs: standing seam, Galvalume with PVDF finish, charcoal
House roof: GAF shingles, charcoal (as built)

Open for George and the engineer: lateral bracing (a Clayton-approved tie, steel post cores or knee braces); bearing for the ridge post, which stands over fill; the frieze over the eave beams, which holds the shared beam line; and the Clayton truss review for the gable's overframe. Every member size is TJ's Colorado precedent, to be re-designed for Michigan loads.